WATERAX STRIKER-II-13V High-Pressure 2-Stage Fire Pump
Write a Review

WATERAX STRIKER-II-13V High-Pressure 2-Stage Fire Pump

ITEM #: 100045 WATERAX

Warning title
Warning_title
Warning detials

WATERAX STRIKER-II-13V High-Pressure 2-Stage Fire Pump

The Honda 13 HP engine and vertical-drive unit in a vehicle mount configuration with a base mount and 8-pin FastWire connectors power the STRIKER-II-13V configuration.

The WATERAX STRIKER-2 pump, also known as the STRIKER-II Plus, combines a dependable 2-stage pump end with a Honda 4-stroke 13 HP engine to achieve pressures of up to 230 PSI (15.9 BAR) and flow rates of up to 105 GPM (397 L/Min). It can be used independently, in tandem, or in parallel with other WATERAX pumps, and is a popular choice for slip-on applications. The STRIKER-2 pump's WATERAX quick-release clamp allows you to replace a damaged pump end in the field with minimal equipment downtime. This interchangeability reduces your spare parts inventory significantly and improves your ability to respond to unexpected equipment damage. The Honda 4-stroke 13 HP engine is simple to use and easy to find engine parts for.

Emissions compliant; engine is CARB and EPA certified.

  • Quick release clamp and swappable pump ends for minimal equipment downtime and inventory
  • Sealed bearing to eliminate pump end greasing in the field
  • Belt drive system for reliable, low maintenance performance
  • Aluminium alloy pump components and anodized parts for lighter weight and greater resistance to corrosion
  • Comprehensive user and service manuals
  • Fuel Tank: Integral 1.6 US gal.
  • Fastwire: 3 ft. CTRL Cable with 8 pin connector
  • Base Mount with Industrial Isolators
  • Drive Unit: Timing Belt and Pulley; Speed Increaser 1.88:1
  • Primer: Honda 3 ft. CTRL Cable with 8 pin connector (FWC-H1-3)
  • Muffler: Forestry Approved Spark Arrestor
  • Dimensions: 30.5 in. x 21.5 in. x 20.8 in.
  • Weight: 127 lbs.

Flow Rate at Specified Pressure

  • Maximum Pressure: 230 PSI
  • Free flow: 105 US gal./min.
  • Maximum Head: 531 ft.

Performance

  • 97 GPM (367 lpm) @ 100 PSI
  • 80 GPM (303 lpm) @ 150 PSI
  • 58 GPM (202 lpm) @ 200 PSI

Engine

  • Model and Type: Honda, GX390 Series 4-cycle, horizontal shaft, single cylinder, OHV
  • Maximum Power: 11.7 hp (8.7 kW) @ 3600 RPM
  • Maximum Torque: 19.5 lb. ft. (26.4 Nm) @ 2500 RPM
  • Starting Power: 12 VDC electric with manual recoil backup start

Pump End

  • Type: Detachable 2-Stage Centrifugal Pump
  • Intake: 2 in. Male NPSH
  • Discharge: 1.5 in. Male NPSH
This item has a $225 shipping surcharge.
More Details
Availability: This item has a shipping surcharge of $225 per unit.
$4,495.00
Adding to cart… The item has been added
BRAND:
MFR#: 100045

UPC:

WATERAX STRIKER-II-13V High-Pressure 2-Stage Fire Pump

The Honda 13 HP engine and vertical-drive unit in a vehicle mount configuration with a base mount and 8-pin FastWire connectors power the STRIKER-II-13V configuration.

The WATERAX STRIKER-2 pump, also known as the STRIKER-II Plus, combines a dependable 2-stage pump end with a Honda 4-stroke 13 HP engine to achieve pressures of up to 230 PSI (15.9 BAR) and flow rates of up to 105 GPM (397 L/Min). It can be used independently, in tandem, or in parallel with other WATERAX pumps, and is a popular choice for slip-on applications. The STRIKER-2 pump's WATERAX quick-release clamp allows you to replace a damaged pump end in the field with minimal equipment downtime. This interchangeability reduces your spare parts inventory significantly and improves your ability to respond to unexpected equipment damage. The Honda 4-stroke 13 HP engine is simple to use and easy to find engine parts for.

Emissions compliant; engine is CARB and EPA certified.

  • Quick release clamp and swappable pump ends for minimal equipment downtime and inventory
  • Sealed bearing to eliminate pump end greasing in the field
  • Belt drive system for reliable, low maintenance performance
  • Aluminium alloy pump components and anodized parts for lighter weight and greater resistance to corrosion
  • Comprehensive user and service manuals
  • Fuel Tank: Integral 1.6 US gal.
  • Fastwire: 3 ft. CTRL Cable with 8 pin connector
  • Base Mount with Industrial Isolators
  • Drive Unit: Timing Belt and Pulley; Speed Increaser 1.88:1
  • Primer: Honda 3 ft. CTRL Cable with 8 pin connector (FWC-H1-3)
  • Muffler: Forestry Approved Spark Arrestor
  • Dimensions: 30.5 in. x 21.5 in. x 20.8 in.
  • Weight: 127 lbs.

Flow Rate at Specified Pressure

  • Maximum Pressure: 230 PSI
  • Free flow: 105 US gal./min.
  • Maximum Head: 531 ft.

Performance

  • 97 GPM (367 lpm) @ 100 PSI
  • 80 GPM (303 lpm) @ 150 PSI
  • 58 GPM (202 lpm) @ 200 PSI

Engine

  • Model and Type: Honda, GX390 Series 4-cycle, horizontal shaft, single cylinder, OHV
  • Maximum Power: 11.7 hp (8.7 kW) @ 3600 RPM
  • Maximum Torque: 19.5 lb. ft. (26.4 Nm) @ 2500 RPM
  • Starting Power: 12 VDC electric with manual recoil backup start

Pump End

  • Type: Detachable 2-Stage Centrifugal Pump
  • Intake: 2 in. Male NPSH
  • Discharge: 1.5 in. Male NPSH
This item has a $225 shipping surcharge.
details

WATERAX STRIKER-II-13V High-Pressure 2-Stage Fire Pump

The Honda 13 HP engine and vertical-drive unit in a vehicle mount configuration with a base mount and 8-pin FastWire connectors power the STRIKER-II-13V configuration.

The WATERAX STRIKER-2 pump, also known as the STRIKER-II Plus, combines a dependable 2-stage pump end with a Honda 4-stroke 13 HP engine to achieve pressures of up to 230 PSI (15.9 BAR) and flow rates of up to 105 GPM (397 L/Min). It can be used independently, in tandem, or in parallel with other WATERAX pumps, and is a popular choice for slip-on applications. The STRIKER-2 pump's WATERAX quick-release clamp allows you to replace a damaged pump end in the field with minimal equipment downtime. This interchangeability reduces your spare parts inventory significantly and improves your ability to respond to unexpected equipment damage. The Honda 4-stroke 13 HP engine is simple to use and easy to find engine parts for.

Emissions compliant; engine is CARB and EPA certified.

  • Quick release clamp and swappable pump ends for minimal equipment downtime and inventory
  • Sealed bearing to eliminate pump end greasing in the field
  • Belt drive system for reliable, low maintenance performance
  • Aluminium alloy pump components and anodized parts for lighter weight and greater resistance to corrosion
  • Comprehensive user and service manuals
  • Fuel Tank: Integral 1.6 US gal.
  • Fastwire: 3 ft. CTRL Cable with 8 pin connector
  • Base Mount with Industrial Isolators
  • Drive Unit: Timing Belt and Pulley; Speed Increaser 1.88:1
  • Primer: Honda 3 ft. CTRL Cable with 8 pin connector (FWC-H1-3)
  • Muffler: Forestry Approved Spark Arrestor
  • Dimensions: 30.5 in. x 21.5 in. x 20.8 in.
  • Weight: 127 lbs.

Flow Rate at Specified Pressure

  • Maximum Pressure: 230 PSI
  • Free flow: 105 US gal./min.
  • Maximum Head: 531 ft.

Performance

  • 97 GPM (367 lpm) @ 100 PSI
  • 80 GPM (303 lpm) @ 150 PSI
  • 58 GPM (202 lpm) @ 200 PSI

Engine

  • Model and Type: Honda, GX390 Series 4-cycle, horizontal shaft, single cylinder, OHV
  • Maximum Power: 11.7 hp (8.7 kW) @ 3600 RPM
  • Maximum Torque: 19.5 lb. ft. (26.4 Nm) @ 2500 RPM
  • Starting Power: 12 VDC electric with manual recoil backup start

Pump End

  • Type: Detachable 2-Stage Centrifugal Pump
  • Intake: 2 in. Male NPSH
  • Discharge: 1.5 in. Male NPSH
This item has a $225 shipping surcharge.

WATERAX STRIKER-II-13V High-Pressure 2-Stage Fire Pump      

$4,495.00
Adding to cart… The item has been added
SUGGESTED PRODUCTS