Waterax STRIKER-3 High-Pressure 3-Stage Fire Pump
Write a Review

WATERAX STRIKER-3-13P High-Pressure 3-Stage Fire Pump

ITEM #: 100049 WATERAX

WATERAX STRIKER-3-13P High-Pressure 3-Stage Fire Pump

This portable STRIKER-3-13P is driven by a 13 HP Honda engine and vertical-drive unit and comes with a carry frame, gasoline tank, hand priming, and check valve.

The WATERAX STRIKER-3, also known as the ULTRASTRIKER® pump, combines a dependable three-stage pump end with a Honda 4-stroke 13 HP engine to attain pressures of up to 345 PSI (23.8 BAR) and flow rates of up to 102 GPM (386 L/Min). It can be used independently, in tandem, or in parallel with other WATERAX pumps, and is a popular choice for slip-on installations. The STRIKER-3 pump's WATERAX quick-release clamp allows you to repair a damaged pump end in the field with minimal equipment downtime. This interchangeability decreases your spare parts inventory significantly and increases your ability to respond to unexpected equipment damage. The Honda 4-stroke 13 HP engine is simple to use and easy to find engine parts for.

Emissions compliant; engine is CARB and EPA certified.

  • Quick-release clamp and swappable pump ends for minimal equipment downtime and inventory
  • Sealed bearing to eliminate pump end greasing in the field
  • Belt drive system for reliable, low-maintenance performance
  • Aluminium alloy pump components and anodized parts for lighter weight and greater resistance to corrosion
  • Comprehensive user and service manuals
  • Drive Unit: Timing Belt and Pulley; Speed Increaser 1.88:1
  • Primer: Jabsco Hand Primer
  • Fuel Tank: Integral 1.6 US gallons
  • Discharge Gauge: -600 PSI, 2 ½”" dial
  • Check Vaulve Manifold: 1 ½”" NPSH
  • Carry frame
  • Dimensions: 9” x 4 ⅛” x 7 ½”
  • Weight: 129 lbs

Flow Rate at Specified Pressure

  • Maximum Pressure: 345 PSI
  • Free flow: 102 US gals/min
  • Maximum Head: 797 ft

Performance

  • 87 GPM (329 lpm) @ 100 PSI (6.9 BAR)
  • 75 GPM (284 lpm) @ 150 PSI (10.3 BAR)
  • 40 GPM (151 lpm) @ 250 PSI (17.2 BAR)

Engine

  • Model and Type: Honda, GX390 Series, 4-cycle, horizontal shaft, single cylinder, OHV
  • Maximum Power: 11.7 hp (8.7 kW) @ 3600 RPM
  • Maximum Torque: 19.5 lb-ft (26.4 Nm) @ 2500 RPM
  • Starting System: 12 VDC electric with manual recoil backup start

Pump End

  • Type: Detachable 3-Stage Centrifugal Pump
  • Intake: 2" Male NPSH
  • Discharge: 1 ½”" Male NPSH
More Details
$5,795.00
Adding to cart… The item has been added
BRAND:
MFR#: 100049

UPC:

WATERAX STRIKER-3-13P High-Pressure 3-Stage Fire Pump

This portable STRIKER-3-13P is driven by a 13 HP Honda engine and vertical-drive unit and comes with a carry frame, gasoline tank, hand priming, and check valve.

The WATERAX STRIKER-3, also known as the ULTRASTRIKER® pump, combines a dependable three-stage pump end with a Honda 4-stroke 13 HP engine to attain pressures of up to 345 PSI (23.8 BAR) and flow rates of up to 102 GPM (386 L/Min). It can be used independently, in tandem, or in parallel with other WATERAX pumps, and is a popular choice for slip-on installations. The STRIKER-3 pump's WATERAX quick-release clamp allows you to repair a damaged pump end in the field with minimal equipment downtime. This interchangeability decreases your spare parts inventory significantly and increases your ability to respond to unexpected equipment damage. The Honda 4-stroke 13 HP engine is simple to use and easy to find engine parts for.

Emissions compliant; engine is CARB and EPA certified.

  • Quick-release clamp and swappable pump ends for minimal equipment downtime and inventory
  • Sealed bearing to eliminate pump end greasing in the field
  • Belt drive system for reliable, low-maintenance performance
  • Aluminium alloy pump components and anodized parts for lighter weight and greater resistance to corrosion
  • Comprehensive user and service manuals
  • Drive Unit: Timing Belt and Pulley; Speed Increaser 1.88:1
  • Primer: Jabsco Hand Primer
  • Fuel Tank: Integral 1.6 US gallons
  • Discharge Gauge: -600 PSI, 2 ½”" dial
  • Check Vaulve Manifold: 1 ½”" NPSH
  • Carry frame
  • Dimensions: 9” x 4 ⅛” x 7 ½”
  • Weight: 129 lbs

Flow Rate at Specified Pressure

  • Maximum Pressure: 345 PSI
  • Free flow: 102 US gals/min
  • Maximum Head: 797 ft

Performance

  • 87 GPM (329 lpm) @ 100 PSI (6.9 BAR)
  • 75 GPM (284 lpm) @ 150 PSI (10.3 BAR)
  • 40 GPM (151 lpm) @ 250 PSI (17.2 BAR)

Engine

  • Model and Type: Honda, GX390 Series, 4-cycle, horizontal shaft, single cylinder, OHV
  • Maximum Power: 11.7 hp (8.7 kW) @ 3600 RPM
  • Maximum Torque: 19.5 lb-ft (26.4 Nm) @ 2500 RPM
  • Starting System: 12 VDC electric with manual recoil backup start

Pump End

  • Type: Detachable 3-Stage Centrifugal Pump
  • Intake: 2" Male NPSH
  • Discharge: 1 ½”" Male NPSH
details

WATERAX STRIKER-3-13P High-Pressure 3-Stage Fire Pump

This portable STRIKER-3-13P is driven by a 13 HP Honda engine and vertical-drive unit and comes with a carry frame, gasoline tank, hand priming, and check valve.

The WATERAX STRIKER-3, also known as the ULTRASTRIKER® pump, combines a dependable three-stage pump end with a Honda 4-stroke 13 HP engine to attain pressures of up to 345 PSI (23.8 BAR) and flow rates of up to 102 GPM (386 L/Min). It can be used independently, in tandem, or in parallel with other WATERAX pumps, and is a popular choice for slip-on installations. The STRIKER-3 pump's WATERAX quick-release clamp allows you to repair a damaged pump end in the field with minimal equipment downtime. This interchangeability decreases your spare parts inventory significantly and increases your ability to respond to unexpected equipment damage. The Honda 4-stroke 13 HP engine is simple to use and easy to find engine parts for.

Emissions compliant; engine is CARB and EPA certified.

  • Quick-release clamp and swappable pump ends for minimal equipment downtime and inventory
  • Sealed bearing to eliminate pump end greasing in the field
  • Belt drive system for reliable, low-maintenance performance
  • Aluminium alloy pump components and anodized parts for lighter weight and greater resistance to corrosion
  • Comprehensive user and service manuals
  • Drive Unit: Timing Belt and Pulley; Speed Increaser 1.88:1
  • Primer: Jabsco Hand Primer
  • Fuel Tank: Integral 1.6 US gallons
  • Discharge Gauge: -600 PSI, 2 ½”" dial
  • Check Vaulve Manifold: 1 ½”" NPSH
  • Carry frame
  • Dimensions: 9” x 4 ⅛” x 7 ½”
  • Weight: 129 lbs

Flow Rate at Specified Pressure

  • Maximum Pressure: 345 PSI
  • Free flow: 102 US gals/min
  • Maximum Head: 797 ft

Performance

  • 87 GPM (329 lpm) @ 100 PSI (6.9 BAR)
  • 75 GPM (284 lpm) @ 150 PSI (10.3 BAR)
  • 40 GPM (151 lpm) @ 250 PSI (17.2 BAR)

Engine

  • Model and Type: Honda, GX390 Series, 4-cycle, horizontal shaft, single cylinder, OHV
  • Maximum Power: 11.7 hp (8.7 kW) @ 3600 RPM
  • Maximum Torque: 19.5 lb-ft (26.4 Nm) @ 2500 RPM
  • Starting System: 12 VDC electric with manual recoil backup start

Pump End

  • Type: Detachable 3-Stage Centrifugal Pump
  • Intake: 2" Male NPSH
  • Discharge: 1 ½”" Male NPSH

WATERAX STRIKER-3-13P High-Pressure 3-Stage Fire Pump      

$5,795.00
Adding to cart… The item has been added
SUGGESTED PRODUCTS