Phos-Chek 4 oz. (36 ea.) WD881 Class A Foam Concentrate
Write a Review

Phos-Chek 4 oz. (36 ea.) WD881 Class A Foam Concentrate

ITEM #: WD881-4-36 PHOS-CHEK

Phos-Chek 4 oz. (36 ea.) WD881 Class A Foam Concentrate

ALL SALES ARE FINAL FOR DISCONTINUED AND CLOSEOUT ITEMS. This item is not eligible for returns or refunds. 

This is a 36 pack of 4 oz. packages of WD881 Class A Foam Concentrate.

The Phos-Chek WD881 Class A Foam Concentrate has been formulated to make water more effective for firefighting. The unique combination of surfactants in WD881 significantly reduces water's surface tension and, when mixed with air, creates a superior foam blanket that surrounds fuels with a thick layer of water. This creates a barrier between the fuel and the fire, knocking down the fire faster than water alone, allowing firefighters to see the areas of application. Making the water more effective reduces the amount of water needed to extinguish the fire, reduces water damage and increases fire fighter safety through quicker knockdown and reduced mop-up/overhaul requirements.

Phos-Chek WD881 is the most concentrated Class A foam product available today. Other products contain significantly more water in the concentrate. This extra water means higher use rates will be required to achieve expected results.

WD881 does not contain fluorinated surfactants such as PFOS/PFOA. Fluorinated surfactants are used in Class B foam concentrates and are necessary to form a film on flammable liquid fires. Class B foams should not be used on Class A fires. Never mix Class A and Class B foam concentrates.

Qualification & Uses:

  • Fully tested and qualified for use by the USDA Forest Service for all application methods under Specification 5100-307a
  • Compatible with fresh water, sea water and long-term retardant
  • Foam characteristics are not affected by freeze-thaw
  • UL listed wetting agent at only 0.1%
  • Contains NO HAZARDOUS INGREDIENTS
  • Readily biodegradable
  • No flash point - making it safe to use near open flames
  • Meets the requirements of NFPA 1150

Use Rates:

  • Wetting Agent: 0.1%
  • Direct attack: 0.3% - 0.5%
  • Mop Up/Overhaul: 0.1% - 0.3%
  • Exposure Protection: 1%
  • Brush (Pre-Treatment): 0.7% - 1%

Characteristics:

  • Color/Odor: Tan liquid with a hint of orange blossom
  • Viscosity: 41 centipoise (cP) at 75o F (24o C)
  • Density: 8.55 lbs/US gallon (1.027 kg/liter)
  • pH: 7-8 (cP); typically 7.5
  • Surface Tension: 29.6 dynes/cm_ @ 0.3%
  • Flash/Fire Point: None (Closed Cup), 2600¡F (127¡C) Flash (Open Cup), 2680¡F (131¡C) Fire (Open Cup)
More Details
$75.77
Adding to cart… The item has been added
BRAND:
MFR#: WD881-4-36

UPC:

Phos-Chek 4 oz. (36 ea.) WD881 Class A Foam Concentrate

ALL SALES ARE FINAL FOR DISCONTINUED AND CLOSEOUT ITEMS. This item is not eligible for returns or refunds. 

This is a 36 pack of 4 oz. packages of WD881 Class A Foam Concentrate.

The Phos-Chek WD881 Class A Foam Concentrate has been formulated to make water more effective for firefighting. The unique combination of surfactants in WD881 significantly reduces water's surface tension and, when mixed with air, creates a superior foam blanket that surrounds fuels with a thick layer of water. This creates a barrier between the fuel and the fire, knocking down the fire faster than water alone, allowing firefighters to see the areas of application. Making the water more effective reduces the amount of water needed to extinguish the fire, reduces water damage and increases fire fighter safety through quicker knockdown and reduced mop-up/overhaul requirements.

Phos-Chek WD881 is the most concentrated Class A foam product available today. Other products contain significantly more water in the concentrate. This extra water means higher use rates will be required to achieve expected results.

WD881 does not contain fluorinated surfactants such as PFOS/PFOA. Fluorinated surfactants are used in Class B foam concentrates and are necessary to form a film on flammable liquid fires. Class B foams should not be used on Class A fires. Never mix Class A and Class B foam concentrates.

Qualification & Uses:

  • Fully tested and qualified for use by the USDA Forest Service for all application methods under Specification 5100-307a
  • Compatible with fresh water, sea water and long-term retardant
  • Foam characteristics are not affected by freeze-thaw
  • UL listed wetting agent at only 0.1%
  • Contains NO HAZARDOUS INGREDIENTS
  • Readily biodegradable
  • No flash point - making it safe to use near open flames
  • Meets the requirements of NFPA 1150

Use Rates:

  • Wetting Agent: 0.1%
  • Direct attack: 0.3% - 0.5%
  • Mop Up/Overhaul: 0.1% - 0.3%
  • Exposure Protection: 1%
  • Brush (Pre-Treatment): 0.7% - 1%

Characteristics:

  • Color/Odor: Tan liquid with a hint of orange blossom
  • Viscosity: 41 centipoise (cP) at 75o F (24o C)
  • Density: 8.55 lbs/US gallon (1.027 kg/liter)
  • pH: 7-8 (cP); typically 7.5
  • Surface Tension: 29.6 dynes/cm_ @ 0.3%
  • Flash/Fire Point: None (Closed Cup), 2600¡F (127¡C) Flash (Open Cup), 2680¡F (131¡C) Fire (Open Cup)
details

Phos-Chek 4 oz. (36 ea.) WD881 Class A Foam Concentrate

ALL SALES ARE FINAL FOR DISCONTINUED AND CLOSEOUT ITEMS. This item is not eligible for returns or refunds. 

This is a 36 pack of 4 oz. packages of WD881 Class A Foam Concentrate.

The Phos-Chek WD881 Class A Foam Concentrate has been formulated to make water more effective for firefighting. The unique combination of surfactants in WD881 significantly reduces water's surface tension and, when mixed with air, creates a superior foam blanket that surrounds fuels with a thick layer of water. This creates a barrier between the fuel and the fire, knocking down the fire faster than water alone, allowing firefighters to see the areas of application. Making the water more effective reduces the amount of water needed to extinguish the fire, reduces water damage and increases fire fighter safety through quicker knockdown and reduced mop-up/overhaul requirements.

Phos-Chek WD881 is the most concentrated Class A foam product available today. Other products contain significantly more water in the concentrate. This extra water means higher use rates will be required to achieve expected results.

WD881 does not contain fluorinated surfactants such as PFOS/PFOA. Fluorinated surfactants are used in Class B foam concentrates and are necessary to form a film on flammable liquid fires. Class B foams should not be used on Class A fires. Never mix Class A and Class B foam concentrates.

Qualification & Uses:

  • Fully tested and qualified for use by the USDA Forest Service for all application methods under Specification 5100-307a
  • Compatible with fresh water, sea water and long-term retardant
  • Foam characteristics are not affected by freeze-thaw
  • UL listed wetting agent at only 0.1%
  • Contains NO HAZARDOUS INGREDIENTS
  • Readily biodegradable
  • No flash point - making it safe to use near open flames
  • Meets the requirements of NFPA 1150

Use Rates:

  • Wetting Agent: 0.1%
  • Direct attack: 0.3% - 0.5%
  • Mop Up/Overhaul: 0.1% - 0.3%
  • Exposure Protection: 1%
  • Brush (Pre-Treatment): 0.7% - 1%

Characteristics:

  • Color/Odor: Tan liquid with a hint of orange blossom
  • Viscosity: 41 centipoise (cP) at 75o F (24o C)
  • Density: 8.55 lbs/US gallon (1.027 kg/liter)
  • pH: 7-8 (cP); typically 7.5
  • Surface Tension: 29.6 dynes/cm_ @ 0.3%
  • Flash/Fire Point: None (Closed Cup), 2600¡F (127¡C) Flash (Open Cup), 2680¡F (131¡C) Fire (Open Cup)

Phos-Chek 4 oz. (36 ea.) WD881 Class A Foam Concentrate      

$75.77
Adding to cart… The item has been added
SUGGESTED PRODUCTS