Honda 1/3 HP 40 GPM 115V Submersible Pump, 20 ft. Heavy-Duty Cord, 1.25 in. NPTF Discharge
This Honda 1/3 HP 40 GPM 115V Submersible Pump, 20 ft. Heavy-Duty Cord, 1.25 in. NPTF Discharge features a lightweight durable stainless steel casing.
1/3hp, 115V Submersible Pump
115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
Rated for Continuous Use
Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
Solids Handling Up to 3/8 in.
Move slurry and dirty liquids without the worry of damaging the pump.
Lightweight Durable Stainless Steel Casing
The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
Automatic Non-Mercury Float Switch
Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
Built-In Thermal Reset Switch
If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
Top Discharge
Great for applications where space is tight.
Operates Fully or Partially Submerged
No need to worry about the water level for the pump!
Shielded Ball Bearings for Added Durability
Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
Oil Lubricated Double Mechanical Seals
Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
- Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
- 20 ft. heavy duty cord
- Efficient air-insulated motor
- Pump Type: Submersible standard
- Starting Type: Automatic
- Casing: Stainless steel
- Motor: 1/3 HP
- Voltage: 115
- Starting Amps: 10
- Running Amps: 4
- Duty: Continuous
- Motor Insulation: Class F
- Overhead Protection: Built-in thermal automatic reset
- Discharge Type: Top
- Discharge Capacity: 40 GPM
- Max. Head: 23 ft.
- Port Diameter: 1.25 in. FNPT
- Maximum Pressure: 10 psi
- Solids Handling: 0.375 in.
- Impeller: Thermo plastic noryl
- Seals: Single carbon/Ceramic lower mechanical seal, rubber single lip upper seal
- Cord Length: 20 ft.
- Dimensions: 6.4 in. x 10.3 in.
- Pump Diameter: 6.4 in.
- Dry Weight: 11 lbs.
WARNING: This product can expose you to chemicals including soots, tars, and mineral oils which are known to the State of California to cause cancer, and carbon monoxide which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
