Write a Review

Council Tool 3.75 lb. Pulaski Axe - NFES Version

ITEM #: 38PE136 NFES COUNCIL

A 3.75 lbs. Pulaski axe with a 36 in. hickory handle. Thought to have been developed in the early 1900s by Edward Pulaski, a legendary Forest Service Ranger in Idaho. It is said that in August 1910 his presence saved the lives of 45 men during a difficult time in a large fire. A traditional style bit axe blade on one end and a mattock blade for digging or grubbing on the other end. Used in a variety of settings including forestry and general landscaping. This version is made to the USFS specification using sharpening gauges on both axe and mattock ends, and the handle meets all dimensional specs required.

  • Forged from 1080 steel
  • Hand sharpened single bit edge and mattock blade.
  • ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 53-58.
  • Body coated with black enamel matching required paint chip and the cutting edges in clear lacquer to deter rust.
  • 36 in. Top-grade double-bit American hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.
  • Axe head is hydraulically seated onto the handle and secured with a serrated PVC wedge. The serrated shape improves bite and the PVC choice of material is strong, lightweight, and does not change size with moisture content.
  • The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the overall length of the handle is removed during assembly. OAL is nominal.
  • Produced in accordance with US Forest Service specification 5100-355E.
  • This product meets the GSA spec for NSN# 5120-00-293-3467.
  • Made in the USA.

We also carry the replacement handle for the Council Tool Pulaski Axe.

More Details
$128.43
Adding to cart… The item has been added
BRAND:
MFR#: 38PE136 NFES

UPC: 008298254471

A 3.75 lbs. Pulaski axe with a 36 in. hickory handle. Thought to have been developed in the early 1900s by Edward Pulaski, a legendary Forest Service Ranger in Idaho. It is said that in August 1910 his presence saved the lives of 45 men during a difficult time in a large fire. A traditional style bit axe blade on one end and a mattock blade for digging or grubbing on the other end. Used in a variety of settings including forestry and general landscaping. This version is made to the USFS specification using sharpening gauges on both axe and mattock ends, and the handle meets all dimensional specs required.

  • Forged from 1080 steel
  • Hand sharpened single bit edge and mattock blade.
  • ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 53-58.
  • Body coated with black enamel matching required paint chip and the cutting edges in clear lacquer to deter rust.
  • 36 in. Top-grade double-bit American hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.
  • Axe head is hydraulically seated onto the handle and secured with a serrated PVC wedge. The serrated shape improves bite and the PVC choice of material is strong, lightweight, and does not change size with moisture content.
  • The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the overall length of the handle is removed during assembly. OAL is nominal.
  • Produced in accordance with US Forest Service specification 5100-355E.
  • This product meets the GSA spec for NSN# 5120-00-293-3467.
  • Made in the USA.

We also carry the replacement handle for the Council Tool Pulaski Axe.

details

A 3.75 lbs. Pulaski axe with a 36 in. hickory handle. Thought to have been developed in the early 1900s by Edward Pulaski, a legendary Forest Service Ranger in Idaho. It is said that in August 1910 his presence saved the lives of 45 men during a difficult time in a large fire. A traditional style bit axe blade on one end and a mattock blade for digging or grubbing on the other end. Used in a variety of settings including forestry and general landscaping. This version is made to the USFS specification using sharpening gauges on both axe and mattock ends, and the handle meets all dimensional specs required.

  • Forged from 1080 steel
  • Hand sharpened single bit edge and mattock blade.
  • ANSI Standards call for bit hardness of Rc 45-60, at least ½ inch back from the cutting edge. Council Tool internal standards call for tempered bit hardness of Rc 53-58.
  • Body coated with black enamel matching required paint chip and the cutting edges in clear lacquer to deter rust.
  • 36 in. Top-grade double-bit American hickory handle. The eye section is dried to below 10% moisture content to minimize shrinkage and help prevent loosening.
  • Axe head is hydraulically seated onto the handle and secured with a serrated PVC wedge. The serrated shape improves bite and the PVC choice of material is strong, lightweight, and does not change size with moisture content.
  • The interior detail of the eye is tapered and allows for a strong mechanical bond. Approximately 1/2 in. of the overall length of the handle is removed during assembly. OAL is nominal.
  • Produced in accordance with US Forest Service specification 5100-355E.
  • This product meets the GSA spec for NSN# 5120-00-293-3467.
  • Made in the USA.

We also carry the replacement handle for the Council Tool Pulaski Axe.



Council Tool 3.75 lb. Pulaski Axe - NFES Version      

$128.43
Adding to cart… The item has been added
SUGGESTED PRODUCTS