CMC Kong Back-Up Device
CMC Kong Back-Up Device
Write a Review

CMC Kong Back-Up Device

ITEM #: 345672 CMC

CMC Kong Back-Up Device

A sleek, compact back-up device with smooth tracking and positioning. Designed for rope access, the Back-Up is classified to ANSI and EN standards for 10-12 mm. rope. It includes a ProSteel auto-locking ANSI carabiner and a 30.5 cm. (12 in.) attachment lanyard. Easy to use with one hand, the Back-Up allows technicians to switch between “Free Mode” for movement on rope and “Lock Mode” to fix the device in place for work positioning and to use it as a rope clamp.

The Back-Up bends rope through an actuating cam, absorbing impact with less risk of rope damage than a traditional, self-locking toothed device. It is designed for 2-person loads when used in a rope access rescue scenario per the notice available under the Resources Tab. In order to be compliant with the ANSI 359.15 standard, the Back-Up must be used with the 12 in. lanyard that comes with the Back-Up ANSI device, a different ANSI Z359.13 certified lanyard, or a direct connection.

Placing the Back-Up over a shoulder assists in releasing the cam and allowing the device to move freely. This mobility is further enhanced by the magnet accessory, which holds the Back-Up in place for smooth travel with the technician. High quality and made in Italy, the Back-Up reliably arrests falls, slides, or uncontrolled descents on vertical or angled rope. It’s the ideal companion for the rope access technician.

Features

  • Sleek, compact back-up device for fall arrest and work positioning
  • Arrests a fall, slide, or uncontrolled descent on vertical or angled rope
  • Smooth tracking, follows operator in both directions of movement
  • Semi-dynamic locking cam mitigates shock and rope damage
  • “Free Mode” enables device movement up and down rope
  • “Lock Mode” fixes the device in place for work positioning
  • Operation can be enhanced with tug cord or magnet accessory
  • Easy to use, install, or remove at any point on the rope
  • Includes 12 in. lanyard and ProSteel Auto-Locking Oval ANSI Carabiner
  • Weight: 15 oz.
  • Rope Size: 10 - 12 mm.

Certifications

  • ANSI Z359.15-2014
  • EN 358:99
  • EN 353-2:02
  • EN 12841:06 A/B
More Details
$199.00
Adding to cart… The item has been added
BRAND: CMC
MFR#: 345672

UPC:

CMC Kong Back-Up Device

A sleek, compact back-up device with smooth tracking and positioning. Designed for rope access, the Back-Up is classified to ANSI and EN standards for 10-12 mm. rope. It includes a ProSteel auto-locking ANSI carabiner and a 30.5 cm. (12 in.) attachment lanyard. Easy to use with one hand, the Back-Up allows technicians to switch between “Free Mode” for movement on rope and “Lock Mode” to fix the device in place for work positioning and to use it as a rope clamp.

The Back-Up bends rope through an actuating cam, absorbing impact with less risk of rope damage than a traditional, self-locking toothed device. It is designed for 2-person loads when used in a rope access rescue scenario per the notice available under the Resources Tab. In order to be compliant with the ANSI 359.15 standard, the Back-Up must be used with the 12 in. lanyard that comes with the Back-Up ANSI device, a different ANSI Z359.13 certified lanyard, or a direct connection.

Placing the Back-Up over a shoulder assists in releasing the cam and allowing the device to move freely. This mobility is further enhanced by the magnet accessory, which holds the Back-Up in place for smooth travel with the technician. High quality and made in Italy, the Back-Up reliably arrests falls, slides, or uncontrolled descents on vertical or angled rope. It’s the ideal companion for the rope access technician.

Features

  • Sleek, compact back-up device for fall arrest and work positioning
  • Arrests a fall, slide, or uncontrolled descent on vertical or angled rope
  • Smooth tracking, follows operator in both directions of movement
  • Semi-dynamic locking cam mitigates shock and rope damage
  • “Free Mode” enables device movement up and down rope
  • “Lock Mode” fixes the device in place for work positioning
  • Operation can be enhanced with tug cord or magnet accessory
  • Easy to use, install, or remove at any point on the rope
  • Includes 12 in. lanyard and ProSteel Auto-Locking Oval ANSI Carabiner
  • Weight: 15 oz.
  • Rope Size: 10 - 12 mm.

Certifications

  • ANSI Z359.15-2014
  • EN 358:99
  • EN 353-2:02
  • EN 12841:06 A/B
details

CMC Kong Back-Up Device

A sleek, compact back-up device with smooth tracking and positioning. Designed for rope access, the Back-Up is classified to ANSI and EN standards for 10-12 mm. rope. It includes a ProSteel auto-locking ANSI carabiner and a 30.5 cm. (12 in.) attachment lanyard. Easy to use with one hand, the Back-Up allows technicians to switch between “Free Mode” for movement on rope and “Lock Mode” to fix the device in place for work positioning and to use it as a rope clamp.

The Back-Up bends rope through an actuating cam, absorbing impact with less risk of rope damage than a traditional, self-locking toothed device. It is designed for 2-person loads when used in a rope access rescue scenario per the notice available under the Resources Tab. In order to be compliant with the ANSI 359.15 standard, the Back-Up must be used with the 12 in. lanyard that comes with the Back-Up ANSI device, a different ANSI Z359.13 certified lanyard, or a direct connection.

Placing the Back-Up over a shoulder assists in releasing the cam and allowing the device to move freely. This mobility is further enhanced by the magnet accessory, which holds the Back-Up in place for smooth travel with the technician. High quality and made in Italy, the Back-Up reliably arrests falls, slides, or uncontrolled descents on vertical or angled rope. It’s the ideal companion for the rope access technician.

Features

  • Sleek, compact back-up device for fall arrest and work positioning
  • Arrests a fall, slide, or uncontrolled descent on vertical or angled rope
  • Smooth tracking, follows operator in both directions of movement
  • Semi-dynamic locking cam mitigates shock and rope damage
  • “Free Mode” enables device movement up and down rope
  • “Lock Mode” fixes the device in place for work positioning
  • Operation can be enhanced with tug cord or magnet accessory
  • Easy to use, install, or remove at any point on the rope
  • Includes 12 in. lanyard and ProSteel Auto-Locking Oval ANSI Carabiner
  • Weight: 15 oz.
  • Rope Size: 10 - 12 mm.

Certifications

  • ANSI Z359.15-2014
  • EN 358:99
  • EN 353-2:02
  • EN 12841:06 A/B

CMC Kong Back-Up Device      

$199.00
Adding to cart… The item has been added
SUGGESTED PRODUCTS

!