CMC Harken Ninja Foot Ascender
CMC Harken Ninja Foot Ascender
(No reviews yet) Write a Review

CMC Harken Ninja Foot Ascender

ITEM #: 342403-01 CMC

CMC Harken Ninja Foot Ascender

The updated Ninja Foot Ascender is both lightweight, durable with design upgrades to make moving on rope even easier. Key updates include a spring-loaded retainer secures rope within the fairlead for better rope management and an adjustable strap that is removable for cleaning or replacement. The Raise end plates align rope better between the symmetrical cams for even smoother operation. 
The housing is hard-coat anodized aluminum while the rope-holding dual cams are stainless steel. The Ninja has a maximum working load of 150 kg. (330 lbs.) and can handle rope of up to 13 mm. (1/2 in.). The Ninja is designed with lower spring force for the least rope drag of any available foot ascender. This means that there is a smoother and easier take off without having to counterweight the rope or reach down to pull the rope through the unit. The result? Increased worker productivity.
Accidental Kick-Outs are a Thing of the Past

The dual cam system plus the spring loaded retainer on the fairlead prevent accidental kick-outs and maintain ideal rope path. The rope stays in place until the user is ready to release it intentionally. The Ninja is the only foot ascender that can be used on either foot.
Won’t Damage Rope

The Ninja uses a transverse ribbed cam as opposed to other designs that rely on aggressive teeth that are known to damage rope.
Innovative Design

Dual cam system (based on Harken’s marine Cam-Matic ball bearing cleats) applies pressure to both sides of the rope simultaneously. This provides more thorough holding power than other designs that press just one side of the rope against just one side of the ascender’s wall.
  • Minimum Line: 8 mm. (5/16 in.)
  • Maximum Line: 13 mm. (1/2 in.)
  • Maximum Rated Load: 1.5 kN (330 lbs.)
  • Width: 3.3 in.
  • Height: 2.9 in.
  • Weight: 0.4 lb.
  • Material: Aluminum
  • Cam Material: Stainless steel
More Details
$109.99
Adding to cart… The item has been added
BRAND: CMC
MFR#: 342403-01

UPC:

CMC Harken Ninja Foot Ascender

The updated Ninja Foot Ascender is both lightweight, durable with design upgrades to make moving on rope even easier. Key updates include a spring-loaded retainer secures rope within the fairlead for better rope management and an adjustable strap that is removable for cleaning or replacement. The Raise end plates align rope better between the symmetrical cams for even smoother operation. 
The housing is hard-coat anodized aluminum while the rope-holding dual cams are stainless steel. The Ninja has a maximum working load of 150 kg. (330 lbs.) and can handle rope of up to 13 mm. (1/2 in.). The Ninja is designed with lower spring force for the least rope drag of any available foot ascender. This means that there is a smoother and easier take off without having to counterweight the rope or reach down to pull the rope through the unit. The result? Increased worker productivity.
Accidental Kick-Outs are a Thing of the Past

The dual cam system plus the spring loaded retainer on the fairlead prevent accidental kick-outs and maintain ideal rope path. The rope stays in place until the user is ready to release it intentionally. The Ninja is the only foot ascender that can be used on either foot.
Won’t Damage Rope

The Ninja uses a transverse ribbed cam as opposed to other designs that rely on aggressive teeth that are known to damage rope.
Innovative Design

Dual cam system (based on Harken’s marine Cam-Matic ball bearing cleats) applies pressure to both sides of the rope simultaneously. This provides more thorough holding power than other designs that press just one side of the rope against just one side of the ascender’s wall.
  • Minimum Line: 8 mm. (5/16 in.)
  • Maximum Line: 13 mm. (1/2 in.)
  • Maximum Rated Load: 1.5 kN (330 lbs.)
  • Width: 3.3 in.
  • Height: 2.9 in.
  • Weight: 0.4 lb.
  • Material: Aluminum
  • Cam Material: Stainless steel
details

CMC Harken Ninja Foot Ascender

The updated Ninja Foot Ascender is both lightweight, durable with design upgrades to make moving on rope even easier. Key updates include a spring-loaded retainer secures rope within the fairlead for better rope management and an adjustable strap that is removable for cleaning or replacement. The Raise end plates align rope better between the symmetrical cams for even smoother operation. 
The housing is hard-coat anodized aluminum while the rope-holding dual cams are stainless steel. The Ninja has a maximum working load of 150 kg. (330 lbs.) and can handle rope of up to 13 mm. (1/2 in.). The Ninja is designed with lower spring force for the least rope drag of any available foot ascender. This means that there is a smoother and easier take off without having to counterweight the rope or reach down to pull the rope through the unit. The result? Increased worker productivity.
Accidental Kick-Outs are a Thing of the Past

The dual cam system plus the spring loaded retainer on the fairlead prevent accidental kick-outs and maintain ideal rope path. The rope stays in place until the user is ready to release it intentionally. The Ninja is the only foot ascender that can be used on either foot.
Won’t Damage Rope

The Ninja uses a transverse ribbed cam as opposed to other designs that rely on aggressive teeth that are known to damage rope.
Innovative Design

Dual cam system (based on Harken’s marine Cam-Matic ball bearing cleats) applies pressure to both sides of the rope simultaneously. This provides more thorough holding power than other designs that press just one side of the rope against just one side of the ascender’s wall.
  • Minimum Line: 8 mm. (5/16 in.)
  • Maximum Line: 13 mm. (1/2 in.)
  • Maximum Rated Load: 1.5 kN (330 lbs.)
  • Width: 3.3 in.
  • Height: 2.9 in.
  • Weight: 0.4 lb.
  • Material: Aluminum
  • Cam Material: Stainless steel

CMC Harken Ninja Foot Ascender      

$109.99
Adding to cart… The item has been added
SUGGESTED PRODUCTS

!