Write a Review

Makita 40V max XGT Brushless Cordless Rear Handle 7-1/4 in. Circular Saw

ITEM #: GSR01Z MAKITA

Makita 40V max XGT Brushless Cordless Rear Handle 7-1/4 in. Circular Saw

The 40V max XGT Brushless Rear Handle 7-1/4 in. Circular Saw (GSR01Z) provides cordless convenience, while taking on high-demand applications. The Makita-built brushless motor delivers 6,400 RPM for high-speed cutting performance. It cuts 3X the material in a single pass with a large cutting capacity of 2-9/16 in. This saw is ideal for framers, builders, roofers, forming, and more.

The GSR01Z offers 56° bevel capacity with positive stops at 22.5° and 45° and a bevel up to 56°. The saw features an electric brake for maximum productivity and a die-cast magnesium base.

Automatic Torque Drive Technology adjusts cutting speed under load for optimum cutting performance. The saw is also equipped with Makita's Extreme Protection Technology (XPT), is a series of integrated seals designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.

XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

Features

  • OUTPOWER: Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
  • OUTSMART: Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
  • OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
  • Up to 375 cuts per charge in 2X4 SPF lumber (battery not included)
  • Power of a 15 AMP corded*
  • 2-9/16 in. cutting depth allows cutting of 3X lumber in a single pass
  • Electric brake for maximum productivity
  • Bevel angle up to 53º, with positive stops at 22.5º and 45º
  • Ergonomic design at only 11.7 lbs.; up to 1.5 lbs. lighter than corded models
  • Increased maneuverability due to lightweight design and Magnesium diecast base
  • Onboard offset wrench for fast and easy blade changes
  • The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
  • The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
  • The XGT Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
  • XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
  • XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (battery not included)
  • The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
  • The XGT Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
  • Compatible with Makita 40V max XGT Lithium-Ion Batteries
  • Only use genuine Makita Batteries and Chargers
  • 3-year limited warranty
  • *Compared to 5377MG
  • Blade Diameter : 7-1/4 in.
  • No Load Speed : 6,400 RPM
  • Max. Cutting Capacity (at 90°) : 2-9/16 in.
  • Max. Cutting Capacity (at 45°) : 1-3/4 in.
  • Max. Cutting Capacity (at 53°) : 1-1/2 in.
  • Arbor : 5/8 in.
  • Net Weight (with battery) : 11.7 lbs.
  • Battery : 40V max XGT Lithium-Ion
  • Overall Length : 17-1/2 in.
  • Power Type : Cordless
  • Handle Type (Circular Saws) : Rear Handle
  • Motor Type : Brushless

Includes

  • (1) Offset Wrench (782016-4)
  • (1) 7-1/4" 24T C.T. Circular Saw Blade (B-61656)

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

  • lead from lead-based paints,
  • crystalline silica from bricks and cement and other masonry products, and
  • arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

For more information, visit www.P65warnings.ca.gov.

More Details
Availability: Due to manufacturer agreements, this item is only available for purchase in select states and is not eligible for discounts or promotions.
$279.00
Adding to cart… The item has been added
BRAND: Makita
MFR#: GSR01Z

UPC: 088381740210

Makita 40V max XGT Brushless Cordless Rear Handle 7-1/4 in. Circular Saw

The 40V max XGT Brushless Rear Handle 7-1/4 in. Circular Saw (GSR01Z) provides cordless convenience, while taking on high-demand applications. The Makita-built brushless motor delivers 6,400 RPM for high-speed cutting performance. It cuts 3X the material in a single pass with a large cutting capacity of 2-9/16 in. This saw is ideal for framers, builders, roofers, forming, and more.

The GSR01Z offers 56° bevel capacity with positive stops at 22.5° and 45° and a bevel up to 56°. The saw features an electric brake for maximum productivity and a die-cast magnesium base.

Automatic Torque Drive Technology adjusts cutting speed under load for optimum cutting performance. The saw is also equipped with Makita's Extreme Protection Technology (XPT), is a series of integrated seals designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.

XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

Features

  • OUTPOWER: Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
  • OUTSMART: Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
  • OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
  • Up to 375 cuts per charge in 2X4 SPF lumber (battery not included)
  • Power of a 15 AMP corded*
  • 2-9/16 in. cutting depth allows cutting of 3X lumber in a single pass
  • Electric brake for maximum productivity
  • Bevel angle up to 53º, with positive stops at 22.5º and 45º
  • Ergonomic design at only 11.7 lbs.; up to 1.5 lbs. lighter than corded models
  • Increased maneuverability due to lightweight design and Magnesium diecast base
  • Onboard offset wrench for fast and easy blade changes
  • The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
  • The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
  • The XGT Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
  • XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
  • XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (battery not included)
  • The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
  • The XGT Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
  • Compatible with Makita 40V max XGT Lithium-Ion Batteries
  • Only use genuine Makita Batteries and Chargers
  • 3-year limited warranty
  • *Compared to 5377MG
  • Blade Diameter : 7-1/4 in.
  • No Load Speed : 6,400 RPM
  • Max. Cutting Capacity (at 90°) : 2-9/16 in.
  • Max. Cutting Capacity (at 45°) : 1-3/4 in.
  • Max. Cutting Capacity (at 53°) : 1-1/2 in.
  • Arbor : 5/8 in.
  • Net Weight (with battery) : 11.7 lbs.
  • Battery : 40V max XGT Lithium-Ion
  • Overall Length : 17-1/2 in.
  • Power Type : Cordless
  • Handle Type (Circular Saws) : Rear Handle
  • Motor Type : Brushless

Includes

  • (1) Offset Wrench (782016-4)
  • (1) 7-1/4" 24T C.T. Circular Saw Blade (B-61656)

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

  • lead from lead-based paints,
  • crystalline silica from bricks and cement and other masonry products, and
  • arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

For more information, visit www.P65warnings.ca.gov.

details

Makita 40V max XGT Brushless Cordless Rear Handle 7-1/4 in. Circular Saw

The 40V max XGT Brushless Rear Handle 7-1/4 in. Circular Saw (GSR01Z) provides cordless convenience, while taking on high-demand applications. The Makita-built brushless motor delivers 6,400 RPM for high-speed cutting performance. It cuts 3X the material in a single pass with a large cutting capacity of 2-9/16 in. This saw is ideal for framers, builders, roofers, forming, and more.

The GSR01Z offers 56° bevel capacity with positive stops at 22.5° and 45° and a bevel up to 56°. The saw features an electric brake for maximum productivity and a die-cast magnesium base.

Automatic Torque Drive Technology adjusts cutting speed under load for optimum cutting performance. The saw is also equipped with Makita's Extreme Protection Technology (XPT), is a series of integrated seals designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.

XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

Features

  • OUTPOWER: Makita-built brushless motor delivers up to 6,400 RPM for faster cutting performance
  • OUTSMART: Automatic Torque drive adjusts cutting speed under load for optimum cutting performance
  • OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh jobsite conditions
  • Up to 375 cuts per charge in 2X4 SPF lumber (battery not included)
  • Power of a 15 AMP corded*
  • 2-9/16 in. cutting depth allows cutting of 3X lumber in a single pass
  • Electric brake for maximum productivity
  • Bevel angle up to 53º, with positive stops at 22.5º and 45º
  • Ergonomic design at only 11.7 lbs.; up to 1.5 lbs. lighter than corded models
  • Increased maneuverability due to lightweight design and Magnesium diecast base
  • Onboard offset wrench for fast and easy blade changes
  • The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
  • The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
  • The XGT Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
  • XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
  • XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (battery not included)
  • The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
  • The XGT Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
  • Compatible with Makita 40V max XGT Lithium-Ion Batteries
  • Only use genuine Makita Batteries and Chargers
  • 3-year limited warranty
  • *Compared to 5377MG
  • Blade Diameter : 7-1/4 in.
  • No Load Speed : 6,400 RPM
  • Max. Cutting Capacity (at 90°) : 2-9/16 in.
  • Max. Cutting Capacity (at 45°) : 1-3/4 in.
  • Max. Cutting Capacity (at 53°) : 1-1/2 in.
  • Arbor : 5/8 in.
  • Net Weight (with battery) : 11.7 lbs.
  • Battery : 40V max XGT Lithium-Ion
  • Overall Length : 17-1/2 in.
  • Power Type : Cordless
  • Handle Type (Circular Saws) : Rear Handle
  • Motor Type : Brushless

Includes

  • (1) Offset Wrench (782016-4)
  • (1) 7-1/4" 24T C.T. Circular Saw Blade (B-61656)

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

  • lead from lead-based paints,
  • crystalline silica from bricks and cement and other masonry products, and
  • arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

For more information, visit www.P65warnings.ca.gov.


Makita 40V max XGT Brushless Cordless Rear Handle 7-1/4 in. Circular Saw      

$279.00
Adding to cart… The item has been added
SUGGESTED PRODUCTS