Life Liners PL23 PBI/Lenzing Double Layer Fire Hood
This fire hood has a separate head with sewn on back and front bib.
Fabric:
- Content: 20/80 PBI / Lenzing FR
- Weight: 6.5 oz. square yd.
- Construction: 1x1 Rib Knit
- Stretch: 100%
- Color: Tan
- The back of the head ends at the nape of the upper neck. The back bib is sewn at this point.
- Two Layers
Bib Design:
- Style: A two piece double layer yoke style bib is sewn to the head and forms a neck seam. The front and back bib are joined at the shoulder to form a notched shoulder seam on either side of the head.
- Two Layers
- Face Opening Sewn with .5 in. elastic
- Relaxed Measurement: 5 in. to 5.5 in.
- Fully Stretched Measurement exceeds 15 in.
Construction:
- Head Seams: All head and bib seams sewn with flat lock stitch.
- Face Opening: Elastic sewn to edge with three thread overlock stitch; turned under and sewn with a two needle cover stitch.
- Binding: One and a half inch binding sewn to hem through folder with a three thread cover stitch to create a .5 in. finished bound hem.
- Thread: 100% NOMEX
- FR label. All four label edges sewn to the hood.
- Certification: Classified by Underwriters Laboratories to meet NFPA Standard 1971 2013 edition.
