Brimstone EV Fire Suppressor System - Mister & Standard EV Blanket Combo 1
Write a Review

Brimstone EV Fire Suppressor System - Mister & Standard EV Blanket Combo

ITEM #: FP-BL-ST-WM-EV-C1 BRIMSTONE

Warning title
Warning_title
Warning detials

Brimstone EV Fire Suppressor System - Mister & Standard EV Blanket Combo

While the EV fire Suppressor Blanket and Mister have the ability to work independently of each other, when used together, they create a comprehensive system to shut down a thermal runaway event.

Covering a vehicle quickly with an EV blanket provides a measure of containment and protection while the Mister delivers a water mist spray directly to the vehicle’s undercarriage chassis to cool the battery modules and help mitigate and dampen vapor cloud ignitions.

With 100 psi at the Mister head, a 10 gpm low-flow water mist spray will be delivered directly to the vehicle's undercarriage to cool the chassis, pulling heat away from the battery modules, to shut down a thermal runaway event. (firefighting droplet size / <1,000 microns)

Tests validate the Mister’s low-flow rate is as effective as high-flow models, while preserving water resources and reducing the amount of toxic runoff. The fine mist can also help mitigate and dampen vapor cloud ignitions that could occur underneath the EV blanket.

In certain situations, the Mister may be used for stand-alone cooling and has been found to offer effective undercarriage coverage in winds up to 25 mph.

Mister Features

  • (1) 6 in. Diameter “no tip” Mister spray head with 15 individual omni-directional spray mist nozzles that deliver true firefighting droplets <1,000 microns
  • (1) Valve pipe length (with twist to open valve and an “always active” universal swivel)
  • (3) Standard pipe lengths
  • Each connection has large threading for ease of assembly
  • Hose connection has a 1.5 in. forestry lug fitting (compatible with US fire hoses and trucks)
  • (1) In-line mesh / filter sleeve
  • Carry and deployment-friendly / high visibility bag
  • Zippered hard case (for extra gaskets, in-line screens, and / or spanner wrenches)
  • Approx. Weight: 12 lbs.
  • Low Profile Clearance: 2.25 in. Tall at the Mister head
  • Assembled Length: 92 in.
  • Approx. Case Size: 9.75 in. x 20.5 in. x 5.5 in.

EV Blanket Features

  • 1 EV Fire Suppressor Blanket (standard)
  • Color: Unique bright white fabric with reflective straps for greater visibility.
  • Ultra lightweight single layer materials with special lab formulated coating on each side.
  • Blanket Materials Melting Point: 2050°F +
  • Blanket Materials Softening Point: 1350°F - 1600°F
  • Extreme heat, reinforced threaded seams.
  • Blanket resistant to most chemical reagents and corrosive agents.
  • Unique reflective double strap handle system for secure deployment and increased visibility.
  • Reflective tape centerlines, so the responders always know where the center of the blanket is.
  • Unique harness loops placed strategically around the perimeter of the blanket.
  • Quick roll out deployment strap system doubles as a whole vehicle wrap around cinch (45 ft. length in case the responders need to secure the EV Fire Suppressor Blanket tight around the base of the vehicle).
  • Approx Size: 20 ft. x 25 ft.
  • Approx Weight: 57 lbs.
  • Carrying Case: Approx Size: 30 in. x 13 in. x 7 in.
  • FAA 25.853B Flammability Test - PASSED
  • FAA 25.853 Flammability Test - PASSED
  • FAA AC20-135 Fireproof 2000°F (1093.3°C) oil burner test - zero flame pass through for the entire test. (materials were still pliable after this test/ no embrittlement)

How the EV Blanket Works:

Covering a vehicle quickly with an EV blanket, when done with a good ground seal, will provide a measure of containment and protection. It helps deprive the fire of free oxygen, thus suppressing flames, which in turn instantly lowers the temperature and decreases the smoke volume.

An EV blanket may also be used as a fire break (covering an object to protect it) or a fire wall (creating a barrier between the fire and other property).

Blanket Carrying Bag & Deployment Features

  • Water resistant material
  • Two person carry straps + padded shoulder strap (single person carry not recommended)
  • Reinforced red “DRAG & GO” pad on bag.
  • No dumping-out, “DROP & GO” quick access zipper bag.
  • Deployment simple “CENTER ON THREAT” arrow on the outside of the bag.
  • Step-by-step instruction card on the outside of the bag.
  • Note: EV Fire Suppressor Extendable Poles sold separately (highly recommended for use on taller vehicles and/or to keep responders farther away from the threat).
More Details
$3,836.70
Adding to cart… The item has been added
BRAND: Brimstone
MFR#: FP-BL-ST-WM-EV-C1

UPC:

Brimstone EV Fire Suppressor System - Mister & Standard EV Blanket Combo

While the EV fire Suppressor Blanket and Mister have the ability to work independently of each other, when used together, they create a comprehensive system to shut down a thermal runaway event.

Covering a vehicle quickly with an EV blanket provides a measure of containment and protection while the Mister delivers a water mist spray directly to the vehicle’s undercarriage chassis to cool the battery modules and help mitigate and dampen vapor cloud ignitions.

With 100 psi at the Mister head, a 10 gpm low-flow water mist spray will be delivered directly to the vehicle's undercarriage to cool the chassis, pulling heat away from the battery modules, to shut down a thermal runaway event. (firefighting droplet size / <1,000 microns)

Tests validate the Mister’s low-flow rate is as effective as high-flow models, while preserving water resources and reducing the amount of toxic runoff. The fine mist can also help mitigate and dampen vapor cloud ignitions that could occur underneath the EV blanket.

In certain situations, the Mister may be used for stand-alone cooling and has been found to offer effective undercarriage coverage in winds up to 25 mph.

Mister Features

  • (1) 6 in. Diameter “no tip” Mister spray head with 15 individual omni-directional spray mist nozzles that deliver true firefighting droplets <1,000 microns
  • (1) Valve pipe length (with twist to open valve and an “always active” universal swivel)
  • (3) Standard pipe lengths
  • Each connection has large threading for ease of assembly
  • Hose connection has a 1.5 in. forestry lug fitting (compatible with US fire hoses and trucks)
  • (1) In-line mesh / filter sleeve
  • Carry and deployment-friendly / high visibility bag
  • Zippered hard case (for extra gaskets, in-line screens, and / or spanner wrenches)
  • Approx. Weight: 12 lbs.
  • Low Profile Clearance: 2.25 in. Tall at the Mister head
  • Assembled Length: 92 in.
  • Approx. Case Size: 9.75 in. x 20.5 in. x 5.5 in.

EV Blanket Features

  • 1 EV Fire Suppressor Blanket (standard)
  • Color: Unique bright white fabric with reflective straps for greater visibility.
  • Ultra lightweight single layer materials with special lab formulated coating on each side.
  • Blanket Materials Melting Point: 2050°F +
  • Blanket Materials Softening Point: 1350°F - 1600°F
  • Extreme heat, reinforced threaded seams.
  • Blanket resistant to most chemical reagents and corrosive agents.
  • Unique reflective double strap handle system for secure deployment and increased visibility.
  • Reflective tape centerlines, so the responders always know where the center of the blanket is.
  • Unique harness loops placed strategically around the perimeter of the blanket.
  • Quick roll out deployment strap system doubles as a whole vehicle wrap around cinch (45 ft. length in case the responders need to secure the EV Fire Suppressor Blanket tight around the base of the vehicle).
  • Approx Size: 20 ft. x 25 ft.
  • Approx Weight: 57 lbs.
  • Carrying Case: Approx Size: 30 in. x 13 in. x 7 in.
  • FAA 25.853B Flammability Test - PASSED
  • FAA 25.853 Flammability Test - PASSED
  • FAA AC20-135 Fireproof 2000°F (1093.3°C) oil burner test - zero flame pass through for the entire test. (materials were still pliable after this test/ no embrittlement)

How the EV Blanket Works:

Covering a vehicle quickly with an EV blanket, when done with a good ground seal, will provide a measure of containment and protection. It helps deprive the fire of free oxygen, thus suppressing flames, which in turn instantly lowers the temperature and decreases the smoke volume.

An EV blanket may also be used as a fire break (covering an object to protect it) or a fire wall (creating a barrier between the fire and other property).

Blanket Carrying Bag & Deployment Features

  • Water resistant material
  • Two person carry straps + padded shoulder strap (single person carry not recommended)
  • Reinforced red “DRAG & GO” pad on bag.
  • No dumping-out, “DROP & GO” quick access zipper bag.
  • Deployment simple “CENTER ON THREAT” arrow on the outside of the bag.
  • Step-by-step instruction card on the outside of the bag.
  • Note: EV Fire Suppressor Extendable Poles sold separately (highly recommended for use on taller vehicles and/or to keep responders farther away from the threat).
details

Brimstone EV Fire Suppressor System - Mister & Standard EV Blanket Combo

While the EV fire Suppressor Blanket and Mister have the ability to work independently of each other, when used together, they create a comprehensive system to shut down a thermal runaway event.

Covering a vehicle quickly with an EV blanket provides a measure of containment and protection while the Mister delivers a water mist spray directly to the vehicle’s undercarriage chassis to cool the battery modules and help mitigate and dampen vapor cloud ignitions.

With 100 psi at the Mister head, a 10 gpm low-flow water mist spray will be delivered directly to the vehicle's undercarriage to cool the chassis, pulling heat away from the battery modules, to shut down a thermal runaway event. (firefighting droplet size / <1,000 microns)

Tests validate the Mister’s low-flow rate is as effective as high-flow models, while preserving water resources and reducing the amount of toxic runoff. The fine mist can also help mitigate and dampen vapor cloud ignitions that could occur underneath the EV blanket.

In certain situations, the Mister may be used for stand-alone cooling and has been found to offer effective undercarriage coverage in winds up to 25 mph.

Mister Features

  • (1) 6 in. Diameter “no tip” Mister spray head with 15 individual omni-directional spray mist nozzles that deliver true firefighting droplets <1,000 microns
  • (1) Valve pipe length (with twist to open valve and an “always active” universal swivel)
  • (3) Standard pipe lengths
  • Each connection has large threading for ease of assembly
  • Hose connection has a 1.5 in. forestry lug fitting (compatible with US fire hoses and trucks)
  • (1) In-line mesh / filter sleeve
  • Carry and deployment-friendly / high visibility bag
  • Zippered hard case (for extra gaskets, in-line screens, and / or spanner wrenches)
  • Approx. Weight: 12 lbs.
  • Low Profile Clearance: 2.25 in. Tall at the Mister head
  • Assembled Length: 92 in.
  • Approx. Case Size: 9.75 in. x 20.5 in. x 5.5 in.

EV Blanket Features

  • 1 EV Fire Suppressor Blanket (standard)
  • Color: Unique bright white fabric with reflective straps for greater visibility.
  • Ultra lightweight single layer materials with special lab formulated coating on each side.
  • Blanket Materials Melting Point: 2050°F +
  • Blanket Materials Softening Point: 1350°F - 1600°F
  • Extreme heat, reinforced threaded seams.
  • Blanket resistant to most chemical reagents and corrosive agents.
  • Unique reflective double strap handle system for secure deployment and increased visibility.
  • Reflective tape centerlines, so the responders always know where the center of the blanket is.
  • Unique harness loops placed strategically around the perimeter of the blanket.
  • Quick roll out deployment strap system doubles as a whole vehicle wrap around cinch (45 ft. length in case the responders need to secure the EV Fire Suppressor Blanket tight around the base of the vehicle).
  • Approx Size: 20 ft. x 25 ft.
  • Approx Weight: 57 lbs.
  • Carrying Case: Approx Size: 30 in. x 13 in. x 7 in.
  • FAA 25.853B Flammability Test - PASSED
  • FAA 25.853 Flammability Test - PASSED
  • FAA AC20-135 Fireproof 2000°F (1093.3°C) oil burner test - zero flame pass through for the entire test. (materials were still pliable after this test/ no embrittlement)

How the EV Blanket Works:

Covering a vehicle quickly with an EV blanket, when done with a good ground seal, will provide a measure of containment and protection. It helps deprive the fire of free oxygen, thus suppressing flames, which in turn instantly lowers the temperature and decreases the smoke volume.

An EV blanket may also be used as a fire break (covering an object to protect it) or a fire wall (creating a barrier between the fire and other property).

Blanket Carrying Bag & Deployment Features

  • Water resistant material
  • Two person carry straps + padded shoulder strap (single person carry not recommended)
  • Reinforced red “DRAG & GO” pad on bag.
  • No dumping-out, “DROP & GO” quick access zipper bag.
  • Deployment simple “CENTER ON THREAT” arrow on the outside of the bag.
  • Step-by-step instruction card on the outside of the bag.
  • Note: EV Fire Suppressor Extendable Poles sold separately (highly recommended for use on taller vehicles and/or to keep responders farther away from the threat).

Brimstone EV Fire Suppressor System - Mister & Standard EV Blanket Combo      

$3,836.70
Adding to cart… The item has been added
SUGGESTED PRODUCTS

!